Grid View:
Quickview

Tamerica TCC 2700XM - 27" Extra Mount Roll Laminator

(0)
$1,194.00 $2,389.00

TAMERICA TCC 2700XM - 27" EXTRA MOUNT ROLL LAMINATORFeaturesLaminates up to 10 milEasily accepts 1000' rolls of 1.5 mil filmVariable Speed - up to 8.8' per minute laminationSpring-load adjustable pressure on laminating and pull rollersAdjustable tension on both upper and lower supply rolls to assure controlled laminationAdjustable feed guideMax mou..

Quickview

Tamerica VersaLam 2700-EP 27" One Sided/Two Sided Roll Laminator w/Stand

(0)
$2,185.00 $4,370.00

TAMERICA VERSALAM 2700-EP 27" ONE SIDED/TWO SIDED ROLL LAMINATOR W/STANDFeaturesLaminates up to 27" in widthAccommodates film up to 10mil in thicknessLaminating speed up to 5ft/minOne Sided AND Two Sided LaminatingMounting capability of 1/4"Temperature Memory FunctionReverse functionManual emergency motor shut-offAuto shut-offFeed tray and front sh..

Quickview

TCC 2700 Roll Laminator Package 3

(0)
$1,080.00 $2,160.00

TCC 2700 ROLL LAMINATOR PACKAGE 3Package Includes-TCC 2700 - 27" Roll Laminator- 1Qty-1.5mil - 25" x 500ft x 1" Clear Glossy Laminating Film- 4Qty-Roll Laminator Workstation- 1Qty-Professional Series Model 554 Paper Trimmer from Dahle- 1QtyFeaturesLaminates up to 10 milEasily accepts 1000' rolls of 1.5 mil filmVariable Speed - 11" to 38" per minute..

Quickview

TCC 27000 - 27" Roll Laminator

(0)
$725.00 $1,450.00

TCC 27000 - 27" ROLL LAMINATORFeaturesLaminates up to 5 milLaminating speed of 6fpmAdjustable tension on both upper and lower supply rolls to assure controlled laminationAdjustable feed guideReverse FunctionFilm TrimmerSafety ShieldTop grade silicon rubber rollersMoving idler bar for easier film threadingSilicon Heated roller for easy clearing and ..

Quickview

Toshiba CA3W Printhead

(0)
$553.00 $1,106.00

TOSHIBA CA3W PRINTHEADDescription:This Toshiba TEC CA3W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 8 levels of grey, since eac..

Quickview

Toshiba CA4W Printhead

(0)
$425.00 $850.00

TOSHIBA CA4W PRINTHEADDescription:This Toshiba TEC CA4W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since ea..

Quickview

TOSHIBA CE4M UV Printhead

(0)
$590.00 $1,180.00

TOSHIBA CE4M UV PRINTHEAD The Toshiba CE4M printhead has high nozzle density with 636 channels and a high driving frequency (especially at small drops). The Toshiba CE4M printhead offers a wide range of drop volume, from 5 to 35 picoliters, with excellent dot placement accuracy and stable jetting with water circulation thermal control.The Toshiba ..

Quickview

Toshiba CE4W1 Printhead

(0)
$1,225.00 $2,450.00

TOSHIBA CE4W1 PRINTHEADUnique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot.Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface.Printer Compatibil..

Quickview

U-Marq GEM-CX5 Engraving Machine

(0)
$4,700.00 $8,500.00

U-MARQ GEM-CX5 ENGRAVING MACHINEProduct Description The U-MARQ GEM-CX5 is designed for the engraving workshop, it is the perfect and easy to use engraving solution. It is easy to set up and use in any retail workshop environment, where fast and efficient engraving of single or multiple items are needed. It is capable of engraving anything from..

Quickview

U-Marq GEM-FX5 Engraving Machine

(0)
$2,200.00 $4,400.00

U-MARQ GEM-FX5 ENGRAVING MACHINEThe Ultimate small footprint engraving machineThe GEM-FX5 can cope with most industrial marking tasks, labels, switch sockets, tags, tools; identification plates the GEM-FX5 can handle them all with speed and precision. With a generous engraving area of 265 x 205 mm (10.4" x 8"), engraving speeds of up to 133 mm/sec ..

Quickview

U-Marq GEM-RX5 Engraving Machine

(0)
$2,200.00 $4,400.00

U-MARQ GEM-RX5 ENGRAVING MACHINEProduct Description The GEM-RX5 has a flat engraving area of 160 x 75mm a 50mm cylindrical capacity and self-centring vice, it's perfect for dealing with individual items or production runs. Combining flat bed and cylindrical engraving has never been achieved in a computerised engraving machine of this size and ..

Quickview

U-Marq GEM-TX5 Engraving Machine

(0)
$1,600.00 $3,200.00

U-MARQ GEM-TX5 ENGRAVING MACHINEProduct Description The GEM-TX5 has a flat engraving area of 160 x 75mm with self-centring vice. The U-MARQ GEM-TX5 is the fastest and easiest general compact 3-axes mechanical engraving machine in the World to suit any budget. The GEM-TX5 comes with self-centring vice, jigs for holding a wide variety of merchan..

Quickview

U-Marq GEM-ZX5 Ring Engraving Machine

(0)
$1,400.00 $2,800.00

U-MARQ GEM-ZX5 RING ENGRAVING MACHINE Product DescriptionThe GEM-ZX5 inside and ouside ring engraver (with expansion possibilities) is one of the most affordable engraving machines from U-MARQ.Ring EngravingWith its inside and outside ring engraving capacity of 12 to 28 mm, makes this the ideal dedicated ring engraver. The bonus for purchases ot t..

Quickview

U-Marq Quest 1824 Heavy Duty Engraving Machine

(0)
$3,300.00 $13,200.00

U-MARQ QUEST 1824 HEAVY DUTY ENGRAVING MACHINE Product DescriptionThe U-MARQ Quest 1824 Heavy Duty Engraving Machines are manufactured to the highest possible standard. The quality of all the U-MARQ Heavy Duty machines are fitted with our Vismec-CX control system and supplied with version 8 of the U-MARQ Advanced Engraving Software. This combinati..

Quickview

U-Marq Universal-350 Engraving Machine

(0)
$7,000.00 $14,000.00

U-MARQ UNIVERSAL-350 ENGRAVING MACHINEProduct DescriptionThe U-MARQ Universal is a true four axis machine, giving the user unprecedented control over the cylindrical axis. The cylindrical axis can be angled to cope with conical shapes or used in automatic centre locating mode for regular cylinders and can be raised or lowered for unusual shaped and..

Showing 736 to 750 of 777 (52 Pages)