Roland monoFab SRM-20 Desktop Milling Machine

Cuttable Material

Modelling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board

X, Y, and Z Operation Strokes

203.2 (X) x 152.4 (Y) x 60.5 (Z) mm

Workpiece table size

232.2 (X) x 156.6 (Y) mm

Distance From Collet Tip to Table

Max, 130.75mm (5.15 in)

Loadable Workpiece Weight

2 kg (4.4 lb)

X-, Y-, and Z-Axis Drive System

Stepping motor

Operating Speed

6 - 1800mm/min
0.24 - 70.87inch/min

Software Resolution

0.01 mm/step (RML-1), 0.001mm/step (NC code)
0.000039 inches/step (RML-1), 0.000039 inches/step (NC code)

Mechanical Resolution

0.000998594 mm/step
0.0000393 inches/step

Dimensions

189.4 (W) × 86.6 (D) × 62.2 (H) in. (4,812 × 2,200 × 1,580 mm)

Spindle Motor

DC motor Type 380

Environment

Temperature: 59 to 86 °F (15 to 30 °C)
Humidity: 40 to 80 %

Spindle Rotation Speed

Adjustable 3000 - 7000 rpm

Cutting Tool Chuck

Collet method

Interface

USB

Control Command Sets

RML-1, NC code

Power Requirements

Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240 V ±10%, 50/60 Hz

Power Consumption

Approx. 50 W

Operating Noise

During operation: 65 dB (A) or less (when not cutting),
During standby: 45 dB (A) or less

External Dimensions

451.0 (W) x 426.6 (D) x 426.2 (H) mm

Weight

19.6 kg (43.2 lb)

Installation Environment

Temperature of 5 to 40°C (41 to 104 °F)
35 to 80% relative humidity (no condensation)

Included Items

USB cable, AC adapter, Power cable, Cutting tool, Collet, Set screw,
Spanners (7,10mm), Hexagonal wrench (size 2,3 mm), Positioning pins,
Double-sided tape, Start-up page guidance card